Joining with electrochemical support (ECUF): Cold pressure welding of copper
By C. Ebbert,H.C. Schmidt,D. Rodman, , F. Nürnberger,W. Homberg,H.J. Maier,G. Grundmeier
Published in Construction and Building Materials
NULL
2014
Abstract
Joining metals using electrochemical support (ECUF) is a new process for cold pressure welding sheets and parts. This new process is based on an electrochemical in-line surface treatment followed by incremental pilger rolling. The ECUF process intends to cold pressure weld materials under optimized conditions. Oxide layers on metal surfaces are known to inhibit the formation of cold pressure welds. The in-line electrochemical treatment will be used to remove these surface oxides for specific engineering metals and alloys. Hence, an improved pressure weld formation at lower forces and smaller reduction ratios is expected for the electrochemically treated surfaces. Using a more flexible pressure welding process, the number of applications could be greatly improved. First tests with copper were performed to analyse the efficiency of the proposed electrochemical surface treatments. Two electrochemical treatments, the cathodic oxide-reduction and cyclovoltammetric oxide-reduction, were compared with conventional treatments (degreasing and scratch brushing) regarding their influence on the cold pressure welding process of copper. The weld strength of lap welds has been investigated as well as the necessary reduction threshold to form a weld. It was found that the electrochemical oxide reduction resulted in higher weld strength. The results of scanning electron microscopy (SEM) and energy dispersive analysis of X-rays (EDX) indicate that surface oxides were successfully removed by the electrochemical surface treatments.
Microsoft is Ending Support for Windows 7
Microsoft will discontinue support for Windows 7 on January 14, 2020 which means Gamry will also be discontinuing support for Windows 7. If you are upgrading to Windows 10, like many companies and institutions, you need to be running Version 7 of our s oftware . Please note that only USB and Ethernet-based instruments can run in Version 7. Eligible users can download the latest version of our software through our online Client Portal .
If you haven't already registered your instrument, you can do so through the Client Portal .
Please email Technical Support if you have any questions regarding this transition. Please be sure to include your instrument model and serial number when contacting us.