Wire mesh current collectors for passive direct methanol fuel cells
By Shrivastava, Naveen K.; Thombre, Shashikant B. & Motghare, Ramani V.
Published in Journal of Power Sources
NULL
2014
Abstract
This paper examines the feasibility of the stainless steel wire mesh as current collector in the passive direct methanol fuel cell (DMFCs-W). A novel single cell fixture is designed and fabricated. The cell performance is evaluated and compared with five different wire mesh current collectors. The supporting plates are optimized for every mesh. The performance of DMFCs-W is compared with the conventional passive DMFC which uses perforated metal plate as current collector (DMFC-P). The polarization tests and electrochemical impedance spectroscopy are performed to investigate the different aspects of the cell performance. The results reveal that the DMFCs-W yield better performance than the DMFC-P. Also, more uniform fuel distribution at catalyst layer and higher cell temperature is achieved with wire mesh current collectors. It is found that the wire mesh geometry has significant effect on the cell performance and the mesh made of relatively thick wires gives better cell performance. This study identifies the stainless steel wire mesh as promising material to be used as current collector and potential substitute to the perforated plate current collectors in the passive DMFC.
Microsoft is Ending Support for Windows 7
Microsoft will discontinue support for Windows 7 on January 14, 2020 which means Gamry will also be discontinuing support for Windows 7. If you are upgrading to Windows 10, like many companies and institutions, you need to be running Version 7 of our s oftware . Please note that only USB and Ethernet-based instruments can run in Version 7. Eligible users can download the latest version of our software through our online Client Portal .
If you haven't already registered your instrument, you can do so through the Client Portal .
Please email Technical Support if you have any questions regarding this transition. Please be sure to include your instrument model and serial number when contacting us.