The effect of large-area pulsed electron beam melting on the corrosion and microstructure of a Ti6Al4V alloy
By Walker, J.C.; Murray, J.W.; Nie, M.; Cook, R.B. & Clare, A.T.
Published in Applied Surface Science
NULL
2014
Abstract
The use of titanium alloys in biomedical applications continues to increase due to the excellent stiffness to weight ratio and high corrosion resistance. In order to improve the surface wettability and corrosion properties of a Ti -6Al -4V alloy, the surface treatment method, large area electron beam melting technique was investigated. Polished samples were subject to pulsed treatments of 1, 15 and 25 at 1.38 J/cm2 beam energy. Surface roughness and contact wetting angles were reduced as a result of the treatment. Microstructural analysis of the surface by XRD and FIB-TEM revealed a martensitic alpha prime phase formed as a result of the high cooling rates induced by the treatment. The presence of this homogenous martensite layer was shown to facilitate a compact passive oxide layer formation during corrosion, thus improving corrosion rates by several orders of magnitude compared to an untreated sample. Large area electron beam melting of Ti -6Al -4V induced a number of changes to the near surface microstructure of the samples, all of which could be used to tailor mechanical and corrosion properties to that of a desired application, without compromising the bulk material properties. These are explored in detail in this work.
Microsoft is Ending Support for Windows 7
Microsoft will discontinue support for Windows 7 on January 14, 2020 which means Gamry will also be discontinuing support for Windows 7. If you are upgrading to Windows 10, like many companies and institutions, you need to be running Version 7 of our s oftware . Please note that only USB and Ethernet-based instruments can run in Version 7. Eligible users can download the latest version of our software through our online Client Portal .
If you haven't already registered your instrument, you can do so through the Client Portal .
Please email Technical Support if you have any questions regarding this transition. Please be sure to include your instrument model and serial number when contacting us.