Copper oxide photocathodes prepared by a solution based process
By Chiang, Chia-Ying; Shin, Yoon; Aroh, Kosi & Ehrman, Sheryl
Published in International Journal of Hydrogen Energy
NULL
2012
Abstract
Solution based processes are well known by their low-cost trait to fabricate semiconductor devices. In this study, we devised an economical solution based route to photoelectrochemical (PEC) cells, taking copper nitrate as the copper ion source and adding an alkali hydroxide, here NaOH, to produce high aspect ratio (3.1–9.7) CuO nanoparticles. These CuO particles were used for splitting water and generation of hydrogen via a PEC cell. CuO nanoparticle morphology, i.e. rod-like, spindle-like, and needle-like, was dependent on the processing temperature. Sintering the spin coated CuO films, improved crystallinity. The bandgaps for these films were estimated to be 1.35Â eV and 1.64Â eV for sintering temperatures of 600 °C and 400 °C for 1Â h, respectively. The porous structure of the nano-sized CuO films increased surface area and thus led to a high photocurrent, i.e. 1.20Â mA/cm2, for powder prepared at 60 °C and sintered at 600 °C for 1Â h. These films demonstrated 0.91% solar conversion efficiency at an applied voltage of -0.55Â V vs. Ag/AgCl in 1Â M KOH electrolyte with 1 sun (AM1.5G) illumination. The charge carrier density was estimated to be 6.1Â X Â 1020Â cm-3. This relatively high charge carrier density may be due to the high surface area and short transport distance to the electrode/electrolyte interface in the porous nanostructure.
Microsoft is Ending Support for Windows 7
Microsoft will discontinue support for Windows 7 on January 14, 2020 which means Gamry will also be discontinuing support for Windows 7. If you are upgrading to Windows 10, like many companies and institutions, you need to be running Version 7 of our s oftware . Please note that only USB and Ethernet-based instruments can run in Version 7. Eligible users can download the latest version of our software through our online Client Portal .
If you haven't already registered your instrument, you can do so through the Client Portal .
Please email Technical Support if you have any questions regarding this transition. Please be sure to include your instrument model and serial number when contacting us.