Electrochemical and mechanical properties of superhydrophobic aluminum substrates modified with nano-silica and fluorosilane

By Shi, Xianming; Nguyen, Tuan Anh; Suo, Zhiyong; Wu, Jianlin; Gong, Jing & Avci, Recep
Published in Surface and Coatings Technology NULL 2012

Abstract

Nano-silica particles were deposited on acid-etched hydrophilic aluminum (Al) substrates by immersion in well-dispersed nano-silica aqueous suspension and tetramethylamonium hydroxide, followed by a heat treatment. The surface was then further treated by a reaction with fluorosilane. The hydrophobicity, surface morphology, and mechanical properties of the coated Al substrates were investigated, along with their electrochemical properties over time of exposure to two NaCl solutions (0.3% and 3% by weight). All the coated Al surfaces exhibited a water contact angle of 155–158°, i.e., superhydrophobicity. The use of nano-silica suspension significantly enhanced the hydrophobicity of the coated Al. Artificial neural networks were used to provide quantitative understanding in how the microstructure of the treated Al surface contributed to its superhydrophobicity and electrochemical properties. When Ra, total (nano-roughness + micro-roughness) exceeds 450 nm, WCA is greater than 154°, independent of the nano/micro-roughness ratio (RRNM). FESEM and AFM images of these surfaces suggest that a rough two-length-scale hierarchical structure coupled with the low surface energy of fluorosilane topcoat led to the superhydrophobicity of the formed coatings. The coating prepared with the 0.2% nano-silica suspension (vs. other concentrations) featured the highest Young's modulus and the best corrosion protection to the Al substrate in both NaCl solutions.

Read Article » Back