Preparation of Pt nanoparticles on carbon support using modified polyol reduction for low-temperature fuel cells

By Lee, Weon-Doo; Lim, Dong-Ha; Chun, Hee-Joon & Lee, Ho-In
Published in International Journal of Hydrogen Energy NULL 2012

Abstract

Highly dispersed Pt nanoparticles supported on Vulcan XC-72R were prepared by a modified polyol reduction for low-temperature fuel cells. The modified polyol reduction was controlled with various concentrations of reducing agent and reduction times at 90 °C. The 20 wt% Pt/C catalyst prepared under an optimum reduction condition (reduction temperature = 90 °C, ethylene glycol/H2O volume ratio = 1, and reduction time = 10 h) exhibited the highest electrochemical active surface area (EAS) and methanol oxidation activity due to the small Pt nanoparticles (1.2 nm) with quite a narrow size distribution between 0.5 and 2 nm. The 40 wt% Pt/C catalyst was prepared using the optimum condition to confirm the applicability of the preparation method. The synthesized 40 wt% Pt/C catalyst had smaller-sized Pt nanoparticles (1.3 nm) and a higher EAS than that of a commercial 40 wt% Pt/C catalyst. With pure H2 (anode) and air (cathode), a PEMFC using the synthesized 40 wt% Pt/C catalyst as a cathode had higher single-cell performance than that of the commercial catalyst.

Read Article » Back