Getting Started with Gamry Software

Basic Explanation of Overloads

Posted on 7 July 2016

During acquisition in the Framework software users will sometimes observe overloads (red or orange data points) indicating that the instrument is in an undesirable state.  When an overload occurs one of 5 indicators will switch on, showing a red or orange box at the bottom of the experiment runner window with a message indicating which overload state has happened.  At the same time the data points will turn red or orange for the overloaded points.  Here is a basic explanation of the different types of overloads:

Read the full article »

Troubleshooting a Failed Calibration

Posted by Gamry on 7 July 2016

A Calibration Failure Warning Appears

Read the full article »

Getting Started With Your First Experiment: EIS300 Electrochemical Impedance Techniques- Potentiostatic Electrochemical Impedance Spectroscopy

Posted by IQnection on 7 July 2016

Electrochemical impedance spectroscopy (EIS) is a powerful technique that utilizes a small amplitude, alternating current (AC) signal to probe the impedance characteristics of a cell.

Read the full article »

Getting Started With Your First Experiment: DC105 Corrosion Techniques- Polarization Resistance

Posted by IQnection on 7 July 2016

Linear polarization resistance (LPR) is a quick, nondestructive testing technique commonly used in material corrosion studies to gain corrosion rate data.

Read the full article »

How to Change the Setup and Editor Fonts in Gamry Framework

Posted by IQnection on 7 July 2016

It is possible to quickly customize the size and style of the font in Gamry Framework. The size adjustment is useful if you are using a low resolution monitor that cannot display the entire setup box if using the standard font defaults.

Read the full article »

Common Hardware/Software Error Messages

Posted by IQnection on 7 July 2016

Framework:

Read the full article »

How to Run Your First Experiment

Posted on 30 March 2015

Basic steps for getting your first experiment running

Read the full article »

Data File and Script Locations

Posted by Aaron on 13 September 2012

Gamry Software uses several proprietary file types for acquisition and analysis purposes.  This list will describe what each type is used for and provide the default location for the files in the supported operating systems.

Read the full article »