A neodymium oxide nanoparticle-doped carbon felt as promising electrode for vanadium redox flow batteries
By Fetyan, Abdulmonem; El-Nagar, Gumaa A.; Derr, Igor; Kubella, Paul; Dau, Holger; Roth, Christina
Published in Electrochimica Acta
2018
Abstract
Neodymium oxide (Nd2O3) nanoparticles were chemically embedded on a state-of-the art carbon felt (CF) by a precipitation method in non-aqueous solution. Different Nd2O3 loadings were chosen and the obtained electrocatalyst-loaded felts tested for application as electrode in all-vanadium redox flow batteries. Cyclic voltammetry (CV) studies confirmed that Nd2O3 has a catalytic effect towards both redox couples, V4+/V5+ at the positive and V2+/V3+ at the negative side. Scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDX) and X-ray diffraction (XRD) demonstrated only minor particle agglomeration and high dispersion of the particles on the fibres. Charge/discharge profiles revealed an enhanced performance with higher discharge capacity and higher energy efficiency for the modified felts when compared to a thermally activated CF. For instance, after 50 consecutive charge/discharge cycles the energy efficiency of the Nd2O3 modified carbon felt (Nd2O3-CF) was reduced only by 3% compared to a 12% irreversible loss observed for the thermally activated CF. After exchanging the electrolyte after 50 cycles, the felts retained their original performance indicating that less degradation occurred in the modified felts than in the industrial standard and that they maintained their oxygen-donating functionalities on the surface as compared to thermally activated CF.
Microsoft is Ending Support for Windows 7
Microsoft will discontinue support for Windows 7 on January 14, 2020 which means Gamry will also be discontinuing support for Windows 7. If you are upgrading to Windows 10, like many companies and institutions, you need to be running Version 7 of our s oftware . Please note that only USB and Ethernet-based instruments can run in Version 7. Eligible users can download the latest version of our software through our online Client Portal .
If you haven't already registered your instrument, you can do so through the Client Portal .
Please email Technical Support if you have any questions regarding this transition. Please be sure to include your instrument model and serial number when contacting us.