Investigation of the effect of cathode stoichiometry of proton exchange membrane fuel cell using localized electrochemical impedance spectroscopy based on print circuit board
By Liu, Dengcheng; Lin, Rui; Feng, Bowen; Yang, Zhen
Published in International Journal of Hydrogen Energy
2019
Abstract
Proton Exchange Membrane Fuel Cell can have a large active area, and the working condition in different areas can be entirely different. Localized electrochemical impedance spectroscopy can directly observe the proton exchange membrane fuel cell internal reaction conditions. In this work, localized electrochemical impedance spectroscopy test system based on print circuit board is implemented in a 50 cm2 multi-channel serpentine flow fields. The localized electrochemical impedance spectroscopy performances of different segments with different cathode stoichiometry (1.8, 2.3 and 2.8) at different current density (100 mA cm?2, 500 mA cm?2 and 900 mA cm?2) are studied. The result demonstrates that the fuel cell may suffer from local drying and flooding at the same time. To make full use of the potential of a fuel cell, a suitable cathode stoichiometry should be identified to control the drying of the inlet and the flooding of the outlet at the same time. It is shown that a cathode stoichiometry of 2.3 is close to the optimum cathode stoichiometry to keep the fuel cell in good consistency without gas waste. Besides, a current density distribution measurement is performed to verify the conclusions of this work.
Microsoft is Ending Support for Windows 7
Microsoft will discontinue support for Windows 7 on January 14, 2020 which means Gamry will also be discontinuing support for Windows 7. If you are upgrading to Windows 10, like many companies and institutions, you need to be running Version 7 of our s oftware . Please note that only USB and Ethernet-based instruments can run in Version 7. Eligible users can download the latest version of our software through our online Client Portal .
If you haven't already registered your instrument, you can do so through the Client Portal .
Please email Technical Support if you have any questions regarding this transition. Please be sure to include your instrument model and serial number when contacting us.