Evaluation of impedance spectroscopy as a tool to characterize degradation mechanisms in silicon photovoltaics
By Yeow, Travis; Sun, Jing; Yao, Zheng; Jaubert, Jean-Nicolas; Musselman, Kevin P.
Published in Solar Energy
2019
Abstract
Advancements in photovoltaic technologies are hindered by degradation mechanisms such as potential induced degradation (PID) and current-induced degradation (CID). In this work, impedance spectroscopy is used to examine passivated emitter and rear cell (PERC) silicon modules with PID and CID. A comparison between control and degraded modules is done to identify key differences in the impedance spectra and determine the extent of the degradation. PID was observed at the module level as a dramatic reduction in shunt resistance, with a small amount of spatial inhomogeneity present in the degradation. It was found that accurate characterization of CID via measurement of the minority carrier lifetime requires a high bias voltage at the module level that exceeds the capabilities of a standard impedance spectrometer. Because of this, CID was also examined at the cell level, where reductions in minority carrier lifetimes could be accurately measured. A correlation between the reduction in minority carrier lifetime due to CID and a reduction in the power conversion efficiency was observed. Thus the PID and CID mechanisms studied here induce unique changes in the impedance spectroscopy results, making them distinguishable and quantifiable. Finally, the ability to mitigate CID through the use of different silicon wafers and a current induced regeneration process was characterized by impedance spectroscopy.
Microsoft is Ending Support for Windows 7
Microsoft will discontinue support for Windows 7 on January 14, 2020 which means Gamry will also be discontinuing support for Windows 7. If you are upgrading to Windows 10, like many companies and institutions, you need to be running Version 7 of our s oftware . Please note that only USB and Ethernet-based instruments can run in Version 7. Eligible users can download the latest version of our software through our online Client Portal .
If you haven't already registered your instrument, you can do so through the Client Portal .
Please email Technical Support if you have any questions regarding this transition. Please be sure to include your instrument model and serial number when contacting us.