Evaluation of electrochemical impedance and biocorrosion characteristics of as-cast and T4 heat treated AZ91 Mg-alloys in Ringer's solution
By Chelliah, Nagaraj M.; Padaikathan, Pambannan; Kumar, Ram
Published in Journal of Magnesium and Alloys
2019
Abstract
The present study aims at understanding the electrochemical impedance and biocorrosion characteristics of AZ91 Mg-alloy in Ringer's solution. As-cast AZ91 Mg-alloy was subjected to T4 heat treatment in a way to homogenize its microstructure by dissolving most of the ?-Mg17Al12 phase at the vicinity of grain boundaries. The electrochemical impedance and biocorrosion performances of these two different microstructures (as-cast and T4 heat treated AZ91 Mg-alloys) in Ringer solution were evaluated by electrochemical impendence spectroscopy, potentiodynamic polarization and weight loss method. EIS spectra showed that both microstructures exhibit similar dynamic response as a function of the immersion time; however, the value of impedance and maximum phase angle are about 50% higher in as-cast AZ91 Mg-alloy as compared to that of homogenized AZ91 Mg-alloy. Weight loss measurement indicated that corrosion resistance of as-cast AZ91 was significantly better than that of homogenized AZ91. Microstructural and XRD analysis revealed that as-cast AZ91 contains a passive film of MgCO3 and CaCO3 precipitates with near spherical morphologies, whereas homogenized AZ91 comprised mainly unstable Mg(OH)2 film featured by irregular plate-like morphologies.
Microsoft is Ending Support for Windows 7
Microsoft will discontinue support for Windows 7 on January 14, 2020 which means Gamry will also be discontinuing support for Windows 7. If you are upgrading to Windows 10, like many companies and institutions, you need to be running Version 7 of our s oftware . Please note that only USB and Ethernet-based instruments can run in Version 7. Eligible users can download the latest version of our software through our online Client Portal .
If you haven't already registered your instrument, you can do so through the Client Portal .
Please email Technical Support if you have any questions regarding this transition. Please be sure to include your instrument model and serial number when contacting us.