Development of diamond composite electrode for anodic oxidation of organic pollutants
By Ajeel, Mohammed A.; Hassan, Thamir A. A.; Naje, Ahmed Samir; Aroua, Mohamed Kheireddine Taeib
Published in Journal of Environmental Chemical Engineering
2018
Abstract
Nano-diamond composite electrode was prepared and used as anode for anodic oxidation process for organic chemicals. Electrochemical techniques such as impedance and cyclic voltammetry have been used to characterize the diamond composite electrode properties. The oxidation power of the electrode was 0.8 V vs. Ag/AgCl, the charge transfer rate was 12.1 ohm, and the double layer capacitance was less than 1 ?F. The anodic oxidation behavior of p-benzoquinone, 2-chlorophenol, and phenol over diamond composite electrode were investigated by cyclic voltammetry in 0.1 M H2SO4 (pH 3) solution and 0.25 M Na2SO4 (pH 6.8) solution. Results marked that the electro-oxidation of p-benzoquinone was more active than phenol and 2-chlorophenol in the both solutions. The performance of the diamond composite electrode during incineration of 200 mg/L p-benzoquinone, 2-chlorophenol, phenol were investigated in an aqueous solution of pH 3 and pH 6.8 with 0.25 M Na2SO4 as the supporting electrolyte and applied current density of 40 mA/cm2. Results showed that the degradation rate of benzoquinone was faster than 2-chlorophenol and phenol in both different pH solutions. Moreover, the benzoquinone degradation rate was enhanced at high pH solution, on the contrary of that of 2-chlorophenol and phenol were clearly favored in acid medium.
Microsoft is Ending Support for Windows 7
Microsoft will discontinue support for Windows 7 on January 14, 2020 which means Gamry will also be discontinuing support for Windows 7. If you are upgrading to Windows 10, like many companies and institutions, you need to be running Version 7 of our s oftware . Please note that only USB and Ethernet-based instruments can run in Version 7. Eligible users can download the latest version of our software through our online Client Portal .
If you haven't already registered your instrument, you can do so through the Client Portal .
Please email Technical Support if you have any questions regarding this transition. Please be sure to include your instrument model and serial number when contacting us.