l-cysteine-assisted synthesis of ruthenium sulfide/thermally reduced graphene oxide nanocomposites: Promising electrode materials for high-performance energy storage applications
By Bolagam, Ravi; Um, Sukkee
Published in Electrochimica Acta
2018
Abstract
This paper describes a facile, single-step hydrothermal method to prepare ruthenium sulfide/thermally reduced graphene oxide (RuS2/TRGO) nanocomposites. In this synthesis procedure, aqueous solutions of RuCl3, l-cysteine, and graphene oxide are employed as the metal, sulfur, and graphene sources, respectively. The chemical structures and morphologies of the nanocomposites are characterized by X-ray diffraction, high-resolution transmission electron microscopy, and X-ray photoelectron spectroscopy. Cyclic voltammetry, galvanostatic charge-discharge cycling, and electrochemical impedance spectroscopy are used to examine their electrochemical performances. The RuS2 nanoparticles (?10 nm) uniformly disperse on the surfaces of the TRGO layers to form the RuS2/TRGO composite, which adequately inhibits aggregation of the RuS2 to fully exploit its impressive electrochemical activity and capacitance as a pseudocapacitive electrode material. The combination of the TRGO interconnected conductive networks and uniformly anchored RuS2 generates a specific capacitance of 193 F g?1 at a 5 mV s?1 scan rate, 150 F g?1 at a 0.5 A g?1 current density, good rate capability (57.3% retention at 6.25 A g?1), and reasonable cycle stability (90% retention of capacitance over 2000 cycles at a current density of 0.75 A g?1). Further, the RuS2/TRGO-30 composite electrode achieves energy densities of 20.84 and 6.11 Wh kg?1 at power densities of 250 and 3666.7 W kg?1, respectively. The RuS2/TRGO composites are promising for high-level energy storage applications because of their superior electrochemical activities.
Microsoft is Ending Support for Windows 7
Microsoft will discontinue support for Windows 7 on January 14, 2020 which means Gamry will also be discontinuing support for Windows 7. If you are upgrading to Windows 10, like many companies and institutions, you need to be running Version 7 of our s oftware . Please note that only USB and Ethernet-based instruments can run in Version 7. Eligible users can download the latest version of our software through our online Client Portal .
If you haven't already registered your instrument, you can do so through the Client Portal .
Please email Technical Support if you have any questions regarding this transition. Please be sure to include your instrument model and serial number when contacting us.