Closing to Scaling-Up High Reversible Si/rGO Nanocomposite Anodes for Lithium Ion Batteries
By Tokur, Mahmud; Algul, Hasan; Ozcan, Seyma; Cetinkaya, Tugrul; Uysal, Mehmet; Akbulut, Hatem
Published in Electrochimica Acta
NULL
2016
Abstract
Abstract In spite of its excellent discharge capacity, low conductivity and poor cycling stability prevent to commercialize silicon negative electrodes for the Lithium ion batteries (LIBs). Since graphene has large surface area, high electrical conductivity and discharge capacity, silicon/graphene nanocomposite anodes in proper architectures alleviate difficulties to improve electrochemical performances of the LIBs. This article demonstrates the nanocomposite synthesizing with 10 wt.%, 30 wt.% and 50 wt.% graphene oxide (GO) dispersion in the silicon matrix following reduction of {GO} (rGO) result in remarkable improvements in the discharge capacity, cycle stability and rate capability. Mechanical milling after {GO} reduction provides decoration of silicon nanoparticles between the rGO sheets and improves interfacial bonding between silicon and rGO which alleviates huge volume increase during cycling. Among the nanocomposite negative electrodes, 50 wt.% rGO exhibits highest reversible capacity of about 2000 mAh g?1 after 100 cycles and good coulombic efficiency approximately 99%. This study proves that dispersion of silicon with rGO and the increase content of rGO lead to improve ionic conductivity, cycling stability, reversibility and rate capability of the Lithium ion cell. Because of the easy scaling-up possibility of the method Si/rGO hybrid nanocomposites can be new electrodes for electrochemical energy storage. .
Microsoft is Ending Support for Windows 7
Microsoft will discontinue support for Windows 7 on January 14, 2020 which means Gamry will also be discontinuing support for Windows 7. If you are upgrading to Windows 10, like many companies and institutions, you need to be running Version 7 of our s oftware . Please note that only USB and Ethernet-based instruments can run in Version 7. Eligible users can download the latest version of our software through our online Client Portal .
If you haven't already registered your instrument, you can do so through the Client Portal .
Please email Technical Support if you have any questions regarding this transition. Please be sure to include your instrument model and serial number when contacting us.