Effect of silicon carbide addition on the corrosion behavior of powder metallurgy Cu30Zn brass in a 3.5 wt% NaCl solution

By Almomani, Mohammed Ali; Tyfour, Wa'il Radwan; Nemrat, Mohammed Hani
Published in Journal of Alloys and Compounds NULL 2016

Abstract

Abstract A study was made to evaluate the corrosion behavior when Cu30Zn alloy is reinforced with different weight fractions of silicon carbide (SiC) particles in a simulated sea solution (3.5 wt% NaCl aqueous solution). The composites were produced via powder metallurgy (PM) route. For the sake of comparison, the corrosion behaviors of unreinforced and reinforced alloy were examined. Electrochemical measurements (potentiodynamic testing) showed that the corrosion rate of the composites decreased with increase of SiC weight percentages, as a result of weak microgalvanic couple between reinforcement particles and Cu30Zn matrix, and the low possibility of intermetallic phases formation. {ANOVA} test indicated that the variations of corrosion rate of the composites upon changing weight percentages of SiC particles are statistically significant. Polarization curves showed that the passive film tends to be less stable, and the potential difference between passivation and free corrosion points increased with increase of SiC weight percentages, as SiC cathodically protect the matrix material by sacrificial anodic dissolution of crevice regions about reinforcement particles. Scanning Electron Microscope (SEM) images of the sample's surfaces before and after testing are in agreement with the electrochemical results.

Read » Back