Production of hydrogen from domestic wastewater using a bioelectrochemically assisted microbial reactor (BEAMR)
By Ditzig, Jenna; Liu, Hong & Logan, Bruce E.
Published in International Journal of Hydrogen Energy
NULL
2007
Abstract
Hydrogen production from domestic wastewater was examined using a plain carbon electrode or graphite-granule packed-bed bioelectrochemically assisted microbial reactors (BEAMRs) capable of continuous or intermittent hydrogen release. When graphite granules were added to the anode chamber (packed-bed mode) current density was increased when the domestic wastewater had a high initial chemical oxygen demand ( COD > 360 mg / L ), and produced a maximum Coulombic efficiency of 26% (applied voltage of 0.41 V) and a maximum hydrogen recovery of 42% (applied voltage of 0.5 V). The packed-bed system successfully treated the wastewater, with removal efficiencies of biochemical oxygen demand (BOD), chemical oxygen demand (COD), and dissolved organic carbon (DOC) in the range of 87–. The final BOD of the treated wastewater was always reduced to less than 7.0 ± 0.2 mg / L . Overall hydrogen production based on COD removal was a maximum of 0.0125 mg - H 2 / mg - COD ( 154 mL - H 2 / g - COD versus a maximum possible conversion of 0.126 mg - H 2 / mg - COD ), with an energy requirement equivalent to 0.0116 mg - H 2 / mg - COD, producing an 8% net yield of H 2 . These results demonstrate that a wastewater treatment based on a BEAMR reactor is feasible, but improvements are needed in hydrogen recoveries and Coulombic efficiencies to increase the overall hydrogen yield.
Microsoft is Ending Support for Windows 7
Microsoft will discontinue support for Windows 7 on January 14, 2020 which means Gamry will also be discontinuing support for Windows 7. If you are upgrading to Windows 10, like many companies and institutions, you need to be running Version 7 of our s oftware . Please note that only USB and Ethernet-based instruments can run in Version 7. Eligible users can download the latest version of our software through our online Client Portal .
If you haven't already registered your instrument, you can do so through the Client Portal .
Please email Technical Support if you have any questions regarding this transition. Please be sure to include your instrument model and serial number when contacting us.