A nanocomposite membrane composed of incorporated nano-alumina within sulfonated PVDF-co-HFP/Nafion blend as separating barrier in a single chambered microbial fuel cell
By Kumar, Vikash and Kumar, Piyush and Nandy, Arpita and Kundu, Patit P.
Published in RSC Adv.
The Royal Society of Chemistry
2016
Abstract
Nano-Al2O3 is incorporated within the blend of sulfonated PVDF-co-HFP/Nafion in varying molar ratios for the preparation of nanocomposite membranes. A series of tests namely, water uptake, swelling ratios, ion-exchange capacity (IEC), proton conductivity, oxygen diffusivity, etc. were conducted to analyze its capability in a microbial fuel cell (MFC). The enhanced water uptake, proton conductivity, and oxygen diffusivity results were observed with increasing nano-Al2O3 in the membrane. The sample A5, containing 5 wt% nano-Al2O3, exhibited superior proton conductivity over a naive SPVdF-co-HFP ([similar]88%) and Nafion 115 membrane ([similar]3.5%). In addition, this prospective membrane revealed comparable ion exchange capacity and reduced oxygen diffusivity than the corresponding Nafion 115. Furthermore, the electrical efficiency of this particular membrane was determined in single chambered MFCs as a constituent of a membrane electrode assembly. Employing mixed Firmicutes as biocatalysts, a maximum power and current density of 541.52 +/- 27 mW m-2 and 1900 +/- 95 mA m-2 were observed from MFC, which revealed an overall [similar]48 and 11% increase over the naive SPVdF-co-HFP and Nafion 115 membrane. With a marked lowering in impedance, the results indicate the relevance of the Al2O3 filled nanocomposite as a separating barrier in single chambered MFCs for microbial bio-energy conversion.
Microsoft is Ending Support for Windows 7
Microsoft will discontinue support for Windows 7 on January 14, 2020 which means Gamry will also be discontinuing support for Windows 7. If you are upgrading to Windows 10, like many companies and institutions, you need to be running Version 7 of our s oftware . Please note that only USB and Ethernet-based instruments can run in Version 7. Eligible users can download the latest version of our software through our online Client Portal .
If you haven't already registered your instrument, you can do so through the Client Portal .
Please email Technical Support if you have any questions regarding this transition. Please be sure to include your instrument model and serial number when contacting us.