Direct-Write, Self-Aligned Electrospinning on Paper for Controllable Fabrication of Three-Dimensional Structures
By Guoxi Luo and Kwok Siong Teh and Yumeng Liu and Xining Zang and Zhiyu Wen and Liwei Lin
Published in ACS Applied Materials & Interfaces
NULL
2015
Abstract
Electrospinning, a process that converts a solution or melt droplet into an ejected jet under a high electric field, is a well-established technique to produce one-dimensional (1D) fibers or two-dimensional (2D) randomly arranged fibrous meshes. Nevertheless, the direct electrospinning of fibers into controllable three-dimensional (3D) architectures is still a nascent technology. Here, we apply near-field electrospinning (NFES) to directly write arbitrarily shaped 3D structures through consistent and spatially controlled fiber-by-fiber stacking of polyvinylidene fluoride (PVDF) fibers. An element central to the success of this 3D electrospinning is the use of a printing paper placed on the grounded conductive plate and acting as a fiber collector. Once deposited on the paper, residual solvents from near-field electrospun fibers can infiltrate the paper substrate, enhancing the charge transfer between the deposited fibers and the ground plate via the fibrous network within the paper. Such charge transfer grounds the deposited fibers and turns them into locally fabricated electrical poles, which attract subsequent in-flight fibers to deposit in a self-aligned manner on top of each other. This process enables the design and controlled fabrication of electrospun 3D structures such as grids, walls, hollow cylinders, and other 3D logos. As such, this technique has the potential to advance the existing electrospinning technologies in constructing 3D structures for biomedical, microelectronics, and MEMS/NMES applications.
Microsoft is Ending Support for Windows 7
Microsoft will discontinue support for Windows 7 on January 14, 2020 which means Gamry will also be discontinuing support for Windows 7. If you are upgrading to Windows 10, like many companies and institutions, you need to be running Version 7 of our s oftware . Please note that only USB and Ethernet-based instruments can run in Version 7. Eligible users can download the latest version of our software through our online Client Portal .
If you haven't already registered your instrument, you can do so through the Client Portal .
Please email Technical Support if you have any questions regarding this transition. Please be sure to include your instrument model and serial number when contacting us.