Investigating the impact and reaction pathway of toluene on a SOFC running on syngas
By Doyle, Tygue S.; Dehouche, Zahir; Aravind, P.V.; Liu, Ming & Stankovic, Sinisa
Published in International Journal of Hydrogen Energy
NULL
2014
Abstract
The integration of solid oxide fuel cells (SOFCs) with gasification systems have theoretically been shown to have a great potential to provide highly efficient distributed generation energy systems that can be fuelled by biomass including municipal solid waste. The syngas produced from the gasification of carbonaceous material is rich in hydrogen, carbon monoxide and methane that can fuel SOFCs. However, other constituents such as tar can cause catalyst deactivation, and blockage of the diffusion pathways. This work examines the impact of increasing concentrations of toluene as a model tar in a typical syngas composition fed to a NiO-GDC/TZ3Y/8YSZ/LSM -LSM SOFC membrane electrode assembly operating at 850°C and atmospheric pressure. Results suggest that up to 20 g/Nm3 of toluene and a low fuel utilisation factor (c.a. 17%) does not negatively impact cell performance and rather acts to increase the available hydrogen by undergoing reformation. At these conditions carbon deposition does occur, detected through EDS analysis, but serves to decrease the ASR rather than degrade the cell. Alternatively, the cell operating with 32 g/Nm3 toluene and with a fuel utilisation of 66.7% is dramatically affected through increased ASR which is assumed to be caused by increased carbon deposition. In order to test for the presence of tar products at the anode exhaust samples have been captured using an absorbing filter with results from HS-GC/MS analysis showing the presence of toluene only.
Microsoft is Ending Support for Windows 7
Microsoft will discontinue support for Windows 7 on January 14, 2020 which means Gamry will also be discontinuing support for Windows 7. If you are upgrading to Windows 10, like many companies and institutions, you need to be running Version 7 of our s oftware . Please note that only USB and Ethernet-based instruments can run in Version 7. Eligible users can download the latest version of our software through our online Client Portal .
If you haven't already registered your instrument, you can do so through the Client Portal .
Please email Technical Support if you have any questions regarding this transition. Please be sure to include your instrument model and serial number when contacting us.