Porous glassy carbon formed by rapid pyrolysis of phenol-formaldehyde resins and its performance as electrode material for electrochemical double layer capacitors
By Sharma, Swati; Kamath, Rahul & Madou, Marc
Published in Journal of Analytical and Applied Pyrolysis
NULL
2014
Abstract
In this article, we report a modified pyrolysis technique featuring an ultra-fast pyrolysis for obtaining a new type of high surface area glassy carbon (GC) from lithographically patterned novolac type phenol-formaldehyde resin, SU8. The fast-pyrolysis chemistry of SU8 is responsible for the formation of bubbles in the carbonizing matrix, which ultimately leads to the observed morphological changes. This porous glassy carbon (PGC) pyrolyzed at a heating rate of 50 °C/min has been evaluated as an electrode material for electrochemical double layer capacitors employing electrochemical techniques such as cyclic voltammetry (CV) and chronoamperometry. The electrochemically available surface area of PGC electrodes is found to be ∼3 times greater compared with flat GC electrodes, and the electrode and specific capacitance improvements are 15 and 5 times, respectively. We describe possible mechanisms that may influence the enhanced capacitor performance of PGC electrodes, and compare their capacitance at five different potential scan rates ranging from 5 to 75 mV/s. In addition, the effect of H2SO4 surface treatment on the electrochemistry of the thus pyrolyzed carbons is investigated. Other possible applications of the thus obtained PGC are also discussed in the concluding remarks.
Microsoft is Ending Support for Windows 7
Microsoft will discontinue support for Windows 7 on January 14, 2020 which means Gamry will also be discontinuing support for Windows 7. If you are upgrading to Windows 10, like many companies and institutions, you need to be running Version 7 of our s oftware . Please note that only USB and Ethernet-based instruments can run in Version 7. Eligible users can download the latest version of our software through our online Client Portal .
If you haven't already registered your instrument, you can do so through the Client Portal .
Please email Technical Support if you have any questions regarding this transition. Please be sure to include your instrument model and serial number when contacting us.