Potential of thick a-C:H:Si films as substitute for chromium plating
By Forsich, Christian; Dipolt, Christian; Heim, Daniel; Mueller, Thomas; Gebeshuber, Andreas; Holecek, Reinhard & Lugmair, Christoph
Published in Surface and Coatings Technology
NULL
2014
Abstract
Chromium plating is a well-established technique for corrosion and wear protection. One essential problem inherent with this process is the use of toxic and carcinogenic hexavalent chromium. A potential substitution of hard chromium with thick a-C:H:Si coatings (amorphous Si-doped hydrogenated carbon) has been studied. a-C:H:Si films represent chemical and electrochemical inert hard coatings with very favorable tribological and corrosion properties. Up to now it was only possible to deposit thin DLC-films because of the high intrinsic stress in the films. A series of laboratory tests including scratch, pin-on-disk and electrochemical corrosion measurements were performed in order to compare the performance of hard chromium and a-C:H:Si. By depositing a-C:H:Si films without using hazard chemicals in a dc-pulsed hot wall plasma system coatings with thicknesses up to 58 μm were produced. These coatings exhibit elastic properties during scratching at the beginning and get a self-sustaining behavior with increased coating thickness resulting in a high load carrying capability. For hard chromium coating cracking was already observed at the very first stage of testing. Sliding tests under unlubricated conditions of a-C:H:Si films showed superior friction performance (friction coefficient μ = 0.02 versus μ = 1.1) and excellent wear resistance of the coating and the counterpart (wear rate 7 ∗ 10- 8 mm3/N- 1 m- 1 versus 6 ∗ 10- 5 mm3/N- 1 m- 1) compared to hard chromium. Further potentiometric observations demonstrated a much better corrosion resistance for thick a-C:H:Si coatings than hard chromium (Ecorr - 0.28 V vs. Ecorr - 0.52 V).
Microsoft is Ending Support for Windows 7
Microsoft will discontinue support for Windows 7 on January 14, 2020 which means Gamry will also be discontinuing support for Windows 7. If you are upgrading to Windows 10, like many companies and institutions, you need to be running Version 7 of our s oftware . Please note that only USB and Ethernet-based instruments can run in Version 7. Eligible users can download the latest version of our software through our online Client Portal .
If you haven't already registered your instrument, you can do so through the Client Portal .
Please email Technical Support if you have any questions regarding this transition. Please be sure to include your instrument model and serial number when contacting us.