Corrosion resistance properties of Ormosil coatings on 2024-T3 aluminum alloy
By Nagiub, A & Mansfeld, F
Published in Progress in Organic Coatings
NULL
2004
Abstract
The corrosion resistance behavior of organically modified silane (Ormosil) thin films on 2024-T3 aluminum alloy substrates was investigated using electrochemical impedance spectroscopy (EIS) and accelerated salt spray analysis techniques. Coatings were prepared containing 0–16.6 vol.% alkyl-modified silane, Xnî—¸Si(OR)4-n, where X=methyl, dimethyl, n-propyl, n-butyl, i-butyl, n-hexyl, n-octyl, or i-octyl. Coating thicknesses were measured to be in the 6–16 μm range, with the thickest coatings being observed for the highest concentrations of alkyl-modified silane. Contact angle measurements showed an enhancement in hydrophobicity of the Ormosil film imparted by increasing size and concentration of the alkyl-modifiers in the coating. In general, corrosion resistance characteristics, as determined using EIS and salt spray techniques, were found to increase with increasing alkyl-modified silane concentration and alkyl chain length. The best overall corrosion resistance was observed for coating systems containing ≥10.4 vol.% alkyl-modified silane; the hexyl-modified films exhibited corrosion resistance properties superior to the other Ormosil coatings. Immersion studies conducted in 0.5 M K2SO4 indicated that coating degradation occurs via hydration of the dense linear chain silicate network leading to the formation of porous cyclic structures.
Microsoft is Ending Support for Windows 7
Microsoft will discontinue support for Windows 7 on January 14, 2020 which means Gamry will also be discontinuing support for Windows 7. If you are upgrading to Windows 10, like many companies and institutions, you need to be running Version 7 of our s oftware . Please note that only USB and Ethernet-based instruments can run in Version 7. Eligible users can download the latest version of our software through our online Client Portal .
If you haven't already registered your instrument, you can do so through the Client Portal .
Please email Technical Support if you have any questions regarding this transition. Please be sure to include your instrument model and serial number when contacting us.