Over-pulsing degrades activated iridium oxide films used for intracortical neural stimulation
By Duarte, R.G.; Bastos, A.C.; Castela, A.S. & Ferreira, M.G.S.
Published in Journal of Neuroscience Methods
NULL
2004
Abstract
Microelectrodes using activated iridium oxide (AIROF) charge-injection coatings have been pulsed in cat cortex at levels from near-threshold for neural excitation to the reported in vitro electrochemical charge-injection limits of AIROF. The microelectrodes were subjected to continuous biphasic current pulsing, using an 0.4 V (versus Ag|AgCl) anodic bias with equal cathodal and anodal pulse widths, for periods up to 7 h at a frequency of either 50 Hz or 100 Hz. At charge densities of 3 mC/cm2, histology revealed iridium-containing deposits in tissue adjacent to the charge-injection sites and scanning electron microscopy of explanted electrodes revealed a thickened and poorly adherent AIROF coating. Microelectrodes pulsed at 2 mC/cm2 or less remained intact, with no histologic evidence of non-biologic deposits in the tissue. AIROF microelectrodes challenged in vitro under the same pulsing conditions responded similarly, with electrodes pulsed at 3 mC/cm2 showing evidence of AIROF delamination after only 100 s of pulsing at 100 Hz (10,000 pulses total), while electrodes pulsed at 2 mC/cm2 for 7 h at 50 Hz (1.3 X 106 pulses total) showed no evidence of damage. In vitro electrochemical potential transient measurements in buffered physiologic saline indicate that polarizing the AIROF beyond the potential window for electrolysis of water (-0.6 to 0.8 V versus Ag|AgCl) results in the observed degradation.
Microsoft is Ending Support for Windows 7
Microsoft will discontinue support for Windows 7 on January 14, 2020 which means Gamry will also be discontinuing support for Windows 7. If you are upgrading to Windows 10, like many companies and institutions, you need to be running Version 7 of our s oftware . Please note that only USB and Ethernet-based instruments can run in Version 7. Eligible users can download the latest version of our software through our online Client Portal .
If you haven't already registered your instrument, you can do so through the Client Portal .
Please email Technical Support if you have any questions regarding this transition. Please be sure to include your instrument model and serial number when contacting us.