Evidence for oxygen reduction reaction activity of a Ni(OH)2/graphene oxide catalyst
By Farjami, Elaheh; Rottmayer, Michael A. & Jay Deiner, L.
Published in J. Mater. Chem. A
The Royal Society of Chemistry
2013
Abstract
Oxygen reduction reaction catalysis on a microwave synthesized Ni(OH)2/graphene oxide material was investigated via cyclic voltammetry, rotating disk electrode measurements, chronoamperometry, and electrochemical impedance spectroscopy. Cyclic voltammetry in an 0.5 M alkaline solution indicated that the Ni(OH)2/graphene oxide material possesses significant oxygen reduction reaction activity as evidenced by a peak potential of -310 mV vs. Ag/AgCl. This value was a shift of +110 mV as compared to the unsupported Ni(OH)2 nanoparticles and +90 mV as compared to the graphene oxide support alone. Rotating disk electrode studies show that the limiting current density of the Ni(OH)2/GO catalyst is 1.3 mA cm-2 and the electron transfer number is 3.5. Chronoamperometry demonstrates that the current density attributable to the oxygen reduction reaction on the Ni(OH)2/graphene oxide material sustained a steady state value of 60% of its initial value. Electrochemical Impedance spectroscopy showed that the charge transfer resistance of the Ni(OH)2/graphene oxide catalyst was significantly lower than either the Ni(OH)2 nanoparticles or the graphene oxide support. The electrocatalytic properties of the Ni(OH)2/graphene oxide material are discussed in the context of specific chemical interaction between the Ni(OH)2 nanoparticles and the graphene oxide support.
Microsoft is Ending Support for Windows 7
Microsoft will discontinue support for Windows 7 on January 14, 2020 which means Gamry will also be discontinuing support for Windows 7. If you are upgrading to Windows 10, like many companies and institutions, you need to be running Version 7 of our s oftware . Please note that only USB and Ethernet-based instruments can run in Version 7. Eligible users can download the latest version of our software through our online Client Portal .
If you haven't already registered your instrument, you can do so through the Client Portal .
Please email Technical Support if you have any questions regarding this transition. Please be sure to include your instrument model and serial number when contacting us.