Enhanced oxygen exchange and incorporation at surface grain boundaries on an oxide ion conductor
By Shim, Joon Hyung; Park, Joong Sun; Holme, Timothy P.; Crabb, Kevin; Lee, Wonyoung; Kim, Young Beom; Tian, Xu; Gür, Turgut M. & Prinz, Fritz B.
Published in Acta Materialia
NULL
2012
Abstract
This study reports spectrometric and spectroscopic evidence indicating a pronounced role of surface grain boundaries in enhancing oxygen incorporation on oxide ion conducting ceramic yttria stabilized zirconia (YSZ). Oxygen isotope exchange measurements were carried out using high spatial resolution (50 nm) secondary ion mass spectrometry (SIMS) under cathodically biased conditions as well as on bare YSZ surface. Surface mapping of the 18O distribution by SIMS clearly shows high activity at surface grain boundaries, suggesting that these boundary regions provide preferential pathways for oxygen incorporation into YSZ in both cases, albeit the effect is less pronounced without bias. The results are supported by a.c. impedance spectroscopy measurements conducted on polycrystalline YSZ membranes with surface grains engineered for different sizes, which indicate that smaller grains (i.e. higher grain boundary densities) exhibit lower electrode impedances. These results open up the possibility of engineering nanostructured YSZ surfaces containing a high density of grain boundaries to achieve enhanced performance of electrochemical devices, particularly for solid oxide fuel cells operating at low temperatures.
Microsoft is Ending Support for Windows 7
Microsoft will discontinue support for Windows 7 on January 14, 2020 which means Gamry will also be discontinuing support for Windows 7. If you are upgrading to Windows 10, like many companies and institutions, you need to be running Version 7 of our s oftware . Please note that only USB and Ethernet-based instruments can run in Version 7. Eligible users can download the latest version of our software through our online Client Portal .
If you haven't already registered your instrument, you can do so through the Client Portal .
Please email Technical Support if you have any questions regarding this transition. Please be sure to include your instrument model and serial number when contacting us.