Preparation and characterization of chalcopyrite compound for thin film solar cells
By Ebrahim, Sh.; Morsi, I.; Soliman, M.; Elsharkawi, M. & Elzaem, A.
Published in Alexandria Engineering Journal
NULL
2011
Abstract
CulnS2 thin films were electrodeposited onto indium tin oxide substrate by the electrodeposition technique. Cyclic voltammetry and chronoamperometry were carried out to determine the optimum pH and the amount of sodium thiosulfate for electroplating CuInS2 compound. The composition, crystallinity and optical properties of the compounds synthesized were studied by energy dispersive X-ray (EDX), (SEM), X-ray diffraction and UV–Visible spectra. It was found that the increasing pH shifts the electrodepositions voltage toward more negative and lowers the deposition current. Increasing the amount of sodium thiosulfate also decreases the deposition current but it has no effect on the deposition potential. It was concluded that CuInS2 with atomic stoichiometric ratio was prepared at pH equals 1 and 150 ml of 0.1 M sodium thiosulfate, 5 ml of 0.1 M indium chloride and 5 ml of 0.1 M cupper acetate. The energy gaps were calculated to be 1.6, 1.7 and 1.75 eV for CuInS2 prepared at 1, 1.5 and 2 of pH, respectively. It was indicated that the amount of the sodium thiosulfate has a slight effect on the energy gap.
Microsoft is Ending Support for Windows 7
Microsoft will discontinue support for Windows 7 on January 14, 2020 which means Gamry will also be discontinuing support for Windows 7. If you are upgrading to Windows 10, like many companies and institutions, you need to be running Version 7 of our s oftware . Please note that only USB and Ethernet-based instruments can run in Version 7. Eligible users can download the latest version of our software through our online Client Portal .
If you haven't already registered your instrument, you can do so through the Client Portal .
Please email Technical Support if you have any questions regarding this transition. Please be sure to include your instrument model and serial number when contacting us.