Low temperature decal transfer method for hydrocarbon membrane based membrane electrode assemblies in polymer electrolyte membrane fuel cells
By Yoon, Young Jun; Kim, Tae-Ho; Kim, Sang Un; Yu, Duk Man & Hong, Young Taik
Published in Journal of Power Sources
NULL
2011
Abstract
Decal transfer is an effective membrane electrode assembly (MEA) fabrication method known for its low interfacial resistance and suitability for mass processing. Previously decal transfer for hydrocarbon membranes was performed at temperatures above 200 °C. Here a novel low temperature decal transfer (LTD) method for hydrocarbon membranes is introduced. The new method applies a small amount (2.2 mg cm-2) of liquid (1-pentanol) onto the membrane separator before decal transfer to lower the Tg of the membrane and achieves complete decal transfer at 110 °C and 6 MPa. Nafion binder amount in the catalyst layer and catalyst layer annealing temperature is controlled to optimize the fuel cell performance. Compared to conventional decal transfer (CDT), the novel LTD method shows enhancement in energy efficiency, simplicity in the process scheme, and improvement in fuel cell performance.
Microsoft is Ending Support for Windows 7
Microsoft will discontinue support for Windows 7 on January 14, 2020 which means Gamry will also be discontinuing support for Windows 7. If you are upgrading to Windows 10, like many companies and institutions, you need to be running Version 7 of our s oftware . Please note that only USB and Ethernet-based instruments can run in Version 7. Eligible users can download the latest version of our software through our online Client Portal .
If you haven't already registered your instrument, you can do so through the Client Portal .
Please email Technical Support if you have any questions regarding this transition. Please be sure to include your instrument model and serial number when contacting us.