Wear and corrosion resistance of laser surface hardened structural steel
By Ramanauskas, R.; Gudaviciute, L.; Diaz-Ballote, L.; Bartolo-Perez, P. & Quintana, P.
Published in Surface and Coatings Technology
NULL
2002
Abstract
CO2 laser surface treatment in solid state has been performed on a CK60 structural steel. The laser energy density was lower than the melting threshold and only caused surface hardening. The observed heat affected zone (HAZ) ranged in depths of 50–430 μm. Microstructure of the HAZ was composed of needle, fine-grained martensite and small amount of pearlite and retained austenite. Microhardness values changed in areas of overlapping successive laser passes. Wear tests revealed the improved wear resistance of the laser treated specimens in comparison with the untreated one. Specimens laser treated using 0 and 38% overlapping ratios exhibited improved wear resistance. The corrosion resistance exhibited a tendency to decrease with increasing overlapping ratios. Among all specimens studied the one, which was laser treated with 0% overlapping ratio presented the best wear and corrosion behaviour.
Microsoft is Ending Support for Windows 7
Microsoft will discontinue support for Windows 7 on January 14, 2020 which means Gamry will also be discontinuing support for Windows 7. If you are upgrading to Windows 10, like many companies and institutions, you need to be running Version 7 of our s oftware . Please note that only USB and Ethernet-based instruments can run in Version 7. Eligible users can download the latest version of our software through our online Client Portal .
If you haven't already registered your instrument, you can do so through the Client Portal .
Please email Technical Support if you have any questions regarding this transition. Please be sure to include your instrument model and serial number when contacting us.