Influence of ammonia on the conductivity of Nafion membranes
By Hongsirikarn, Kitiya; Goodwin Jr., James G.; Greenway, Scott & Creager, Stephen
Published in Journal of Power Sources
NULL
2010
Abstract
The effect of NH3 and NH4+ poisoning on the conductivity of Nafion membranes was investigated via electrochemical impedance spectroscopy. The conductivities of membranes prepared with different NH4+ compositions were measured in deionized water at room temperature and compared to those at 80 °C in a gas phase for various relative humidities. The liquid-phase conductivity decreased linearly with an increase in the NH4+ composition in the membrane ( y N H 4 + ), with that of the NH4+-form having a conductivity 25% that of the H+-form. The gas-phase conductivity of the NH4+-form, on the other hand, declined by 66–98% relative to the H+-form depending on humidity. The conductivities of fresh membranes in the presence of gas-phase NH3 at different humidities were also studied. The conductivity decreased with time-on-stream and reached the same conductivity at a given humidity regardless of the NH3 concentration, but the time to reach steady-state varied with NH3 concentration. The y N H 4 + at steady-state conductivity was equivalent for all the NH3 concentrations studied. The kinetics of conductivity decrease was slower at higher humidities. The humidity and y N H 4 + appear to have a concerted effect on the conductivity. The quantitative conductivity data under practical fuel cell conditions should be useful for future fuel cell modeling.
Microsoft is Ending Support for Windows 7
Microsoft will discontinue support for Windows 7 on January 14, 2020 which means Gamry will also be discontinuing support for Windows 7. If you are upgrading to Windows 10, like many companies and institutions, you need to be running Version 7 of our s oftware . Please note that only USB and Ethernet-based instruments can run in Version 7. Eligible users can download the latest version of our software through our online Client Portal .
If you haven't already registered your instrument, you can do so through the Client Portal .
Please email Technical Support if you have any questions regarding this transition. Please be sure to include your instrument model and serial number when contacting us.