Corrosion and wear behavior of thermally sprayed nano ceramic coatings on commercially pure Titanium and Ti–13Nb–13Zr substrates

By Richard, C.; Kowandy, C.; Landoulsi, J.; Geetha, M. & Ramasawmy, H.
Published in International Journal of Refractory Metals and Hard Materials NULL 2010

Abstract

Surface treatments and coatings are the practical approaches used to extend the lifetime of components and structures especially when the surface is the most solicited part of the considered engineering component. Hard thermally sprayed coating is one of the most wear resistance coating widely used in many practical mechanical applications. In the construction of articulating parts of medical devices, titanium and its alloys have to be surface coated to improve their tribocorrosion behavior. In this way, the use of porous thermal coatings is known to be a strategy for better binding bone or tissue on femoral stem for example. It is, thus, important to evaluate the corrosion and the wear behaviors of such materials for biosecurity considerations in the human body. In this study, we investigate the behavior of new nano ZrO2 and Al2O3-13 wt.% TiO2 thermal sprayed coatings on commercially pure (cp)-Ti (grade 4) and titanium alloy substrates. Friction and wear tests against Al2O3 balls showed that the wear resistance of Al2O3-13 wt.% TiO2 is better than that ZrO2 coating. Both plasma sprayings have similar abrasive wear behavior; however, the average friction coefficient is higher for alumina–titania coating. Electrochemical tests, open circuit potential monitoring and potentiodynamic polarization, were performed in simulated body conditions (Hank’s solution, 37 °C). Results showed that corrosion resistance was appreciably higher for alumina–titania coating.

Read Article » Back