Electrical characterization of Au/n-ZnO Schottky contacts on n-Si
By Aydoğan, L.; Çinar, K.; Asil, H.; Coşkun, C. & Türüt, A.
Published in Journal of Alloys and Compounds
NULL
2009
Abstract
Wide band gap semiconducting layer of n-type ZnO thin film was fabricated on n-type Si substrate with electrochemical deposition technique and the current–voltage (I–V) and the capacitance–voltage/frequency (C–V/f) characteristics of the structure have been measured at room temperature. The characteristic parameters of the structure such as barrier height, ideality factor and series resistance were determined from the current–voltage measurements. Also, Cheung functions and Norde method were used to plot the I–V characteristics and, to extract the characteristic parameters of the Schottky contact. It was seen that trap-filled space charge-limited current (SCLC) is the dominant transport mechanism at large forward bias. The capacitance measurements showed that the values of capacitance were almost independent of frequency up to a certain value of frequency whereas at high frequencies the capacitance decreased quickly. The higher values of capacitance at low frequencies were attributed to the excess capacitance resulting from the interface states in equilibrium with the ZnO that can follow the alternating current (ac) signal.
Microsoft is Ending Support for Windows 7
Microsoft will discontinue support for Windows 7 on January 14, 2020 which means Gamry will also be discontinuing support for Windows 7. If you are upgrading to Windows 10, like many companies and institutions, you need to be running Version 7 of our s oftware . Please note that only USB and Ethernet-based instruments can run in Version 7. Eligible users can download the latest version of our software through our online Client Portal .
If you haven't already registered your instrument, you can do so through the Client Portal .
Please email Technical Support if you have any questions regarding this transition. Please be sure to include your instrument model and serial number when contacting us.